Gasketing/Sealing     

Loctite® Gasket Sealant 1

TECHNICAL DATA SHEET

    Loctite® Gasket Sealant 1 is a reliable, paste-like gasket sealant, dressing, and coating. Sets quickly to a hard set and is recommended for rigid, permanent assemblies. Use to 400°F. Resistant to gasoline and other solvents. (Reddish Brown)

7 oz. tube    P/N 30512                    $10.15/ea.

Loctite® Gasket Sealant #2

  Loctite® Gasket Sealant #2 is a reliable, paste-like gasket sealant, dressing, and coating. Sets more slowly to a pliable film best suited for non-rigid, vibrating assemblies. Use to 400°F. Resistant to gasoline and other solvents.

3 oz. tube    P/N 30514                    $4.25/ea.            (Black)

7 oz. tube    P/N 30515                    $9.74/ea.

TECHNICAL DATA SHEET

Loctite® 504™ Gasket Eliminator® Flange Sealant

    Loctite® 504™ Gasket Eliminator® Flange Sealant is a single-component, instant, low pressure seal that fills gaps to 0.50".

250ml tubes    P/N 50441                    $66.50/ea.                    (Orange)

TECHNICAL DATA SHEET

Loctite® 510™ Gasket Eliminator® Flange Sealant 

Loctite® 510™ Gasket Eliminator® Flange Sealant has a temperature range to 400°F with excellent solvent and chemical resistance. Makes or dresses gaskets in rigid assemblies. Eliminates gasket compression set.

50 ml tube    P/N 51031                    $29.94/ea.                (Red)

TECHNICAL DATA SHEET

Loctite® 515™ Gasket Eliminator® Flange Sealant

Loctite® Gasket Maker 515™ Flange Sealant is a flexible, gasketing material for use on rigid machined flanges with less than 0.015" gap. OEM approved – use where OEs specify 515 or “anaerobic” gasket (cures in absence of air). Eliminates preformed, pre-cut, paper, rubber and cork gaskets.

50 ml tube    P/N 51531                    $18.99/ea.                    (Purple)

TECHNICAL DATA SHEET

Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings

Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings, is a liquid sealant for locking and sealing high pressure, fluid power systems with tapered fittings. Contains no fillers and will not foul valves or fluid filtering systems.

50 ml tube     P/N 54531                    $40.28/ea.                    (Purple)

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET

Loctite® 565™ PST® Thread Sealant

    Loctite® 565™ PST® Thread Sealant is a general purpose instant sealant for tapered and straight/tapered fittings. Controlled strength for ease of disassembly.

50 ml tube     P/N 56531                    $18.12/ea.                        (White)

TECHNICAL DATA SHEET

Loctite® 567™ PST® Thread Sealant

    Loctite® 567™ PST® Thread Sealant withstands temperatures to 400°F with excellent solvent resistance. Locks and seals tapered pipe threads and fittings, including high pressure applications. Disassembles with hand tools.

50 ml tuibe     P/N 56747                        $21.05/ea.                    (White)        (STAINLESS STEEL APPLICATIONS)

TECHNICAL DATA SHEET

Loctite® 580™ PST® Thread Sealant

Loctite® 580™ PST® Thread Sealant.  For threaded fittings in fossil fuel, solar and hydro plant piping systems.

50 ml tube     P/N 58031                $48.32/ea.        (Low Halogen Application)

TECHNICAL DATA SHEET

Loctite® 592™ PST® Thread Sealant

    Loctite® 592™ PST® Thread Sealant locks and seals threaded fittings. Parts may be repositioned up to 24 hours after application.

50 ml tube     P/N 59231                    $18.12/ea.                (White)      (SLOW CURE)

TECHNICAL DATA SHEET

Loctite® Instant Gasket

    Loctite® Instant Gasket makes high performance, leakproof gaskets in one minute. Equipment can be returned to service immediately. Blowout resistant. Out performs precut gaskets

7 oz. Aerosol     P/N 30509                           $22.20/ea.

TECHNICAL DATA SHEET

Loctite® Tight® Multipurpose Anaerobic Gel

    Loctite® Pro Lock Tight® is an all purpose anaerobic gel that locks, seals and retains.

50 ml tube     P/N 51604                    $28.56/ea.                    (Blue)

TECHNICAL DATA SHEET

Loctite® Hi-Tack Gasket Sealant

    Loctite® Hi-Tack Gasket Sealant. Red-colored, liquid sealant that holds gaskets in place during assembly. Seals and bonds rubber, cork, paper, felt, metal, and asbestos gaskets. Sets quickly to a very tacky film. Suitable to 500°F (260°C). Contains no ozone-depleting compounds.

Aerosol Can      P/N 30526                    $10.43/ea.            (Red)

TECHNICAL DATA SHEET

Loctite® Maxi-Coat™

Loctite® Maxi-Coat™ is a heavy-duty coating that provides long-term protection for metal parts, equipment, and machinery. Forms a protective, waxy film which seals out moisture, air, acid, and other corrosive elements. Great for protecting parts in storage. Removable with Loctite® Electrical Contact Cleaner.

12 oz. aerosol     P/N 51211                            $11.37/ea.

TECHNICAL DATA SHEET

Loctite® Cold Galvanizing Compound

Loctite® Cold Galvanizing Compound sprays on metal surfaces to prevent corrosion even when the surface is scratched. Ideal touch-up for welded seams. Highly resistant to salt corrosion and water. Not resistant to acid or alkaline solutions. Contains no ozone-depleting compounds.

15 oz. aerosol     P/N 82039                    $10.88/ea.                    (Low Gloss Grey)

TECHNICAL DATA SHEET

Loctite® Extend® Rust Treatment

Loctite® Extend® Rust Convertor provides one-step rust treatment that destroys old rust, prevents new rust. Just brush or spray it on. Within minutes, rust disappears and is converted to a durable black protective coating. Surface rust must be present. Use as a primer or finish coat. Specially formulated to be used with body filler and fiberglass.

1-Quart      P/N 75430                    $37.41/ea.           (Converts from White Liquid to Matte Black)

1-Gallon     P/N 75448                    $127.09/ea.

TECHNICAL DATA SHEET

Pricing as of 7/2012 (Subject to change without notice)

Contact us now at:

Kraft Industrial Supply

200 South Spruce Ave. Unit #3, South San Francisco, California 94080

sales@kraftindustrialsupply.com

Phone 650-952-5606    Fax 650-952-3210

 

 

 

     Contact us now at:

KRAFT INDUSTRIAL SUPPLY

200 South Spruce Ave. #3 South San Francisco, Ca. 94080

    650-952-5606

Send mail to sales@kraftindustrialsupply.com with questions or comments about this web site.